|Max. Lifting Platform Height:||5.9M||Max Drive Speed:||5.9M|
|Extension Platfrom Capacity:||100kg||Table Size:||Length 1.66 X Width 0.75xHeight 1.24m|
|Overall Dimensions:||L1.84xW0.76xH2.18m||Total Weight:||1550kg|
6m Elevating Work Platform,
19ft Elevating Work Platform,
240kg Load Elevating Work Platform
Imported from Trojan of United State, the capacity of foursome serial batteries can reach to 225Ah (optional 260Ah), and it can be used over 8 hours under general conditions.
There is a battery charger which is sealed type with waterproof grade IP67 and high power conversion efficiency up to94%, adaptive voltage 85-265v inside the machine and a charging indicator outside. The charging indicator will give a signal when full charge finished.
With the battery meter the user could easily notice the battery volume and the working hour remaining.
Imported electrical motor controller could avoid the current surge and make the entire machine stable and reliable.
The machine could work while be charging. With various advanced technologies, the machine is energy saving and consumption reducing.
An open type hydraulic system has applied with explosion prevention strobe and emergency drop switch.
Controlled by PLC and CANBUS control, the machine could perform more accurate for lifting, moving and turning actions. The protection grades reach to IP65 for the enclosed type charger and other major electrical components. Using special materials for the platform control cables (7 core), spiral cables for the control box, it is more convenient to operate and remove.
Multifarious protections are applied including high-pressure protection(420v),low-pressure protection, short-circuit protection, over current protection, temperature protection,inverse connection protection and battery temperature protection.
|Max. Lifting Height||5.9m|
|Min. Ground Clearance-stowed||7cm|
|Min. Ground Clearance-Raised||2cm|
|Extension platform capacity||100kg|
|Hydraulic Oil Tank Capacity||15L|
|Machine Total Weight||1500kg|